型号 CK-N特性及应用: CK-N系列为不含油封及无轴承支撑的楔块式单向离合器,适用于低运转速度。 安装时,螺栓与摆杆槽孔的间隙为槽孔的1%宽度,摆杆与离合器在安装后绝不可有内应力存在(安装时螺栓不可将扭力臂轴向锁住,径向也要留有间隙,使得没有弯曲应力施加于轴承及摆杆上)。 CK-N系列主要应用于包装、印刷设备上的防止逆转,定位给料;可在最小的空间内提供较大的扭矩。 Description: Type CK-N is sprag type one-way clutch integrate without supporting bearing and oil seal, and is suitable to application at low running speed. A blt, secured to a fixed part of the machine anf passing through the slot in the torque arm. Provides the rotating stop. Radial clearance on this bolt should be equal to 1% of the solt with. The torque arm and the bearing must not be prestressed. Primarily used as a backstop or indexing clutch in packing and printing. This type provides a high torque capacity with a minimum space reuirement. 安装参考范例 Mounting example 型号 CK-N TYPE